Zn85 Series Indoor Vacuum Circuit Breaker
Product Description
ZN85 Series Inoor Vacuum circuit breaker
Description
ZN85-40.5/T2000-31.5 type indoor high voltage vacuum circuit breaker for three-phase AC 50Hz, 40.5kv power system, for industrial and mining enterprises, power plants and substations as the division and load current, overload current fault current perposes, and occasions for frequent operation. The circuit breaker arrangement with upper and lower structure, effectively reduce the depth of circuit b,reakers. And the use of composite structure, three-phase interrupter and associated charged body by the three independent phase separation of epoxy resin insulation casing, using a composite structure, the circuit breaker to meet the air under normal operating conditions from the required distance and climb and effectively reduce the size of circuit breakers, electrical circuit interrupter, a leading and dynamic and static conductive connection installed in the insulating tube, so that the distance only 300mm. All main circuit electrical connection fixed to connect with high reliability.
Parameters
Technical Information
Overall and installation dimensions
Description
ZN85-40.5/T2000-31.5 type indoor high voltage vacuum circuit breaker for three-phase AC 50Hz, 40.5kv power system, for industrial and mining enterprises, power plants and substations as the division and load current, overload current fault current perposes, and occasions for frequent operation. The circuit breaker arrangement with upper and lower structure, effectively reduce the depth of circuit b,reakers. And the use of composite structure, three-phase interrupter and associated charged body by the three independent phase separation of epoxy resin insulation casing, using a composite structure, the circuit breaker to meet the air under normal operating conditions from the required distance and climb and effectively reduce the size of circuit breakers, electrical circuit interrupter, a leading and dynamic and static conductive connection installed in the insulating tube, so that the distance only 300mm. All main circuit electrical connection fixed to connect with high reliability.
Parameters
Technical Information
Techinical Specification | |||||||
Rated voltage | KV | 40.5 | |||||
Rated short circuit breaking capacity 4sec. | KA | 25 | 31.5 | 25 | 31.5 | ||
Rated current | A | 1250 | 1600 | 2000 2500 | |||
Rated power frequency | Hz | 50/60 | |||||
Power frequency withstand voltage 50Hz 1 min,: | KV | 95 | |||||
Imulse withstand voltage 1.2/50μs: | KV | 185 | |||||
Peak withstand current | KA Peak. | 63 | 80 | 63 | |||
Making capacity | KA | 63 | 80 | 63 | |||
Operation sequence | times/h | 0-0.3-CO-180S-CO | |||||
Mechanism endurance | cycles | 10000 |
Overall and installation dimensions
Product Categories : Vacuum circuit breaker
Premium Related Products
Other Products
Hot Products
FCDH0704-3R9 Wholesale 1uh-1mH Smd Choke Coil Inductor For DC-DC ConverterSMD Mini chip Power inductor 10uhEI 28 Low Frequency Encapsulated Transformer with 2.0VA and 50/60Hz220v to 12v High Reliability MnZn EDR Transformer For Office EquipmentEPC 17 High Frequency 240v 380v EPC Transformer For Microwave Oven40-100w RM Series Switching Led Driver TransformerUU 16 Line Filter Transformer For Common Mode Filter InductorCustom High Frequency ETD29 Transformer 220v to 12v50/60HZ 220 volt to 12 volt dc Toroidal TransformerEFD15-H CE UL standard Customized Output 220v ac dc Small Transformers 12vPCB Mounting PQ3230 smps High-frequency Step-up TransformerCE UL Standard 220v Power 12v Step Down Pcb TransformerManufacturers Wire Wound 100uh 0.1A SMD Power Inductor For DC-DC Converter2017 new design 6*6*4.5mm NR6045-120M 12uh top quality low price ferrite shield SMT inductorR6X25 R Type cylindrical Rod Soft Ferrite CoreHS1 Material CH10T25X15X10 MnZn T Type Soft Ferrite Core HS1 Material